CATRA

[ You are here >> Products >> Sharpening >> Model : U200 ]

Model: U200 Knife Sharpener and Hollow Grinder

LARGE SIZE PRODUCTION UNIT
Designed and Manufactured by CATRA
CATERERS - RESTAURANTS - BUTCHERS - CHEFS-ABATTOIRS - HOTELS - SMALL FOOD PROCESSORS - SHOPS- SMALL KNIFE MAKERS

U200image

Approx Prices excluding Shipping

Please contact CATRA for the latest prices

Some used machines often available

Specifications
Grinding wheel diameter

200 mm

Grinding wheel width

5 mm

Maximum practical blade size

850mm long x 200mm wide

Overall Size

1000 x 700 x 500 mm

Weight

250 Kg

Power

1.5 kW fan cooled

Voltage

3 ph 380/440V or single phase 220V

Noise Level

70dBa

*Oil coolant/ lubrication system optional, only required for extremely arduous duties

Stainless steel version available

Can be fitted with direct angle readout or hand held goniometer

Typical sharpness measurements from this machine

 

 

 

 

 

 

 



In the knife re-sharpening environment, the equipment can easily be adjusted to provide a hollow grinding process for well used blades where the edge has become too thick. Adjustment between sharpening and hollow grinding takes less than 10 seconds and a typical hollow grind time is less than 2 minutes.

Knife Type Edge Thickness Pieces/Hour Approximate Wheel Life Between Coatings Approximate Consumable Grinding Wheel Re-coat Cost/blade*
  • 100mm
  • 150mm
  • 200mm
  • 0.03mm
  • 0.30mm
  • 0.35mm
  • 240
  • 180
  • 124
  • 40,000 pieces
  • 30,000 pieces
  • 24,000 pieces
  • 1.3p (2.6c)
  • 1.6p ( 3.2c)
  • 1.9p ( 3.8c)

NOTE: Re-sharpening rates are up to twice the above pieces/hour.

Top of the page

CATRA, Henry Street, Sheffield S3 7EQ, Great Britain Fax: +44 (0)114 272 2151 Tel: +44 (0)114 276 9736 Email: info@catra.org